The diagram below shows how geothermal energy is used to produce electricity.
The flow chart illustrates electricity producing process with geothermal energy. Generally speaking, there are 6 main stages in the process, including on the ground and underground.
First and foremost process is started by collected cold water is pumped down in 4,5 km underground through the injection well. Following this the pumping down cold water is converts at a geothermal zone with hot rocks into the hot water. Once, the heated water is it pumped up by production well to condenser at ground into the steam.
In the last 2 stages, the steam is powered in turbine, they are ready to produce electricity at generator. Finally, produced electricity is carried and stored by power lines to electrical building.
| Post date | Users | Rates | Link to Content |
|---|---|---|---|
| 2025-04-20 | Trần Ánh Vy | 84 | view |
| 2025-04-13 | Trần Ánh Vy | 78 | view |
| 2025-01-01 | mardanpour | 67 | view |
| 2024-12-26 | Lethanh54 | 78 | view |
| 2024-12-25 | Lethanh54 | 67 | view |
- The chart and table below give information about population figures in Japan
- The pie charts below give data on the spending and consumption of resources by countries of the world and how the population is distributed 78
- The maps below show the center of a small town called Islip from 2010 to 2015 69
- The map below shows the development of the village of Ryemouth between 1995 and the present 78
- Eating sweet foods produces acid in the mouth which can cause tooth decay High acid levels are measured by low pH values 78